XB-07 6H超耐磨地坪系统  6H super wear-resistingflooring system

★适用范围  Scope of application

食品厂、药厂及耐磨性要求高的场所。

Food factory, pharmaceutical factory and require high wear resistance.

★性能特点  The performance characteristics of

环保无气味，高耐候，6H超耐磨，耐有机酸及高温蒸汽，耐水性强。

Environmental protection, no odor, high weather resistance, 6 h, super durable resistance to organic acid and high temperature steam and water resistance.

★施工工序  Construction process

1、一楼及以下地面需已做好防水处理；

2、素地处理：依素地情况进行研磨，除尘，修补，找平地面；

3、环氧底漆：用超强渗透底漆滚涂一道，提高地面的强度，增加环氧地坪的附着力；

4、环氧中涂：用无溶剂自流平中涂加入适量的石英砂镘涂一至两道，以找平地面，提高地面的强度；

5、超耐磨面漆：用超耐磨面漆施工一道，施工时需三人一组，边刮涂边穿钉鞋用滚筒收均匀，完工后的地面不能有滚筒印，面漆用量0.1Kg/m2；

6、成品完工：24小时后方可上人，72小时后方可重压；（以25℃为准，低温时间延长）

1, the first floor and below the ground need to have good waterproof processing;

2, element processing: in accordance with the element of grinding, dust removal, repair, leveling the ground;

3, epoxy primer: with super osmotic priming paint roller coating, increase the intensity of the ground, increasing the epoxy floor paint adhesion;

4, epoxy coating: using solvent-free self-leveling paint add just the right amount of quartz sand float between one and two, to leveling the ground and to improve the strength of the ground;

5, super wear-resistant paint: super wear resistant finish construction, three people a group during construction, blade coating while wearing spikes with drum evenly, after the completion of the ground cannot have roller printing and paint dosage of 0.1 Kg/m2;

6, finished product finished: 24 hours can be stepped back, rear can weigh 72 hours; (at 25℃ shall prevail, prolonged low temperature)